ukhaa.blogg.se - Edision argus mini combo receiver user manual

#EDISION ARGUS MINI COMBO RECEIVER USER MANUAL UPDATE#
#EDISION ARGUS MINI COMBO RECEIVER USER MANUAL TV#

* Do not touch the Edison OS mini with wet hands. * Do not connect or modify cables while the Edision OS mini is connected to the power. * Do not place any containers with liquid, such as vases, on the Edision OS mini. * Do not place open flame sources, such as lighted candles, near or on the Edision OS mini. * Do not expose the Edision OS mini to liquid, moisture, direct sunlight, and extreme weather. * Do not cover the Edision OS mini ventilation openings with items such as newspapers, tablecloths, curtains, etc. * If unused for a prolonged amount of time, turn the power OFF. * For sufficient ventilation, leave enough space. The manufacturer takes no responsibility for the incorrect handling of the Edision OS mini. Please read the safety instructions carefully before using the Edision OS mini.

#EDISION ARGUS MINI COMBO RECEIVER USER MANUAL TV#

After booting up, the Initial setup menu comes up for the installation according to your TV settings and Antenna settings.

Connect the coaxial cable (from the satellite dish) to the LNB INPUT of Edison OS mini, alternatively the aerial cable of your cable network operator or of your DVB T Antenna to the Antenna In Input.

Connect Edison OS mini to your TV set using an HDMI cable or an RCA cable.

Please refer to the Safety Instruction before powering on the device.

External Power Supply Connect the power supply (12V / 3.5A).

USB Connect to the External HDD or USB storage with USB cable (Max.

#EDISION ARGUS MINI COMBO RECEIVER USER MANUAL UPDATE#

This is also used to update Edison OS mini + software

Ethernet Communication port via HTTP, FTP, NFS, Telnet, and Samba to access your Hard Drive or to upload channel lists.

Only channels with the same Polarisation (horizontal/vertical) and in the same frequency bands are considered (low/high)

Turn the receiver OFF first before connecting

LNB1 INPUT 1st satellite tuner input from the LNB on a dish antenna.

USB Connect to the External HDD or USB storage with a USB cable.

Display current menu information and channel name etc.

Power Button Switch between operation and standby modes.